Pulp beating degree tester is a special instrument used to measure the water suspension rate of diluted pulp. It is designed according to the international general principle of Shaw.
Pulp pulping degree tester is a special instrument for measuring the water filtration performance of pulp. This instrument is based on the phenomenon that the degree of pulp dissolution is inversely proportional to the filtration speed of pulp suspension. The water filtration performance of the slurry suspension was measured, the fiber condition was studied, and the degree of pulp beating was evaluated.
The sealing cone is pressed by hand and the rising speed is adjusted by heavy hammer. Therefore, the operation of the instrument is very simple. The instrument adopts elastic fan pre tightening mechanism, which makes the rubber sealing ring of the sealing hammer body closely combined with the bottom of the water filter cylinder, thus increasing the sealing performance of the sealing hammer body.
Parameter item |
Technical index |
Measurement range (SR) |
0-100 |
Rising speed of sealing cone (mm /s) |
100±10 |
Discharge time of overflow port |
149±1s |
Remaining volume (ml) |
7.5-8.0 |
Instrument size (length * width * height) mm |
250*450*1180 |
Net weight (kg) |
38 |
If you have any demands please contact,we will provide suitable products for you.
