Stainless Steel Yankee Dryer Cylinder of Paper Industry

• Customization: Available
• Automation: Automatic
• Certification: CE
• Model NO.: SHIN2211
• Customized: Customized
• Condition: New
• Application: Drying Paper
• Diameter: 3660-5486mm
• Design Pressure: 1.0MPa
• Design Speed: 2200rpm
• Trim Width: 5600mm
• Transport Package: Exporting Stand
• Specification: make to order
• Trademark: SUN HONG
• Origin: China
• HS Code: 8439990000

Product Description

Product Description

The Yankee Dryer is the key component of modern high speed tissue machinery,which structure has been constant innovated,make the tissue machinery is possible to realize the higher speed,higher width and the quality papers.
Our design Yankee Dryer,absorb the foreign advanced technology concept,adopt U groove structure for the internal surface of shell,strengthen its rigid,make the heat transfer area enlarge,reduce the thickness of condensate film,and improve the drying efficiency.

 

Drying principle

The saturated steam introduced from the steam joint is condensed inside the dryer cylinder, and the heat released
causes the temperature of the dryer cylinder to rise,so as to heat the paper sheet coated on the surface of the roller shell.
Heat is transferred to the paper in contact with the surface of the paper and the dryer. 

Steam condenses to produce a large amount of condensed water after the heat is released from the steam.
These condensed water is attached to the inner surface of the dryer by centrifugal force due to the rotation of the dryer,
and forms a water ring at a high angular velocity, which hinders the transfer of heat to the dryer surface.
Siphon condensate will be promptly discharged.
When the speed is low will not form a water ring, but there will be condensation in the dryer splash, accumulation.  

Features

Dryer Cylinder Casting workshop:
1. Hot blast Cupola(3T/h,8T/h)and medium frequency furnace (10)duplex melting .
2.Dryer Cylinder Casting Workshop The resin sand production line with capacity of20T/h.
3.The spectrum analyzer guarantees the quality of your products.

Dryer cylinder Machining workshop: 
1.More than 40 sets of jumbo machine tools for turning,milling,shaver,grinding,drilling.
2.Maximum Diameter of dryer cylinder : 4000mm
Maximum length of workpiece :12000mm
Maximum balancing capacity : 50tons.

Advantages

1.The shell is thinner,ensure the more heat to transfer(Evaporate rate).

2.Better elasticity,stronger compressive resistance,which have enough security coefficient for heat shock,machinery fault and potential explosion etc hazards.

3.The surface metal spraying adopts advanced foreign technology and equipment,increase service life.

4.The metal coating of surface can reinforce the chemical coating and wrinkling.

5.No bolts heads to block,can improve the papers stable performance.

6.During operating,the shell thickness is reduced and the metal coating is fall off,which not affects the using performance.

7.Since the date of installing can be put into operating,don't need to run-in with the host,its performance will not reduce as the service life is growing.

Product Parameters

Model	Dia (mm)	Design speed (rpm)	Trim width (mm)	Max linear pressure (KN/M)	Max steam pressure (MPa)
12SH	3660	2200	5600	120KN/m	1.0MPa
15SH	4572
16SH	4877
18SH	5486

Our service

Pre-sales service
1.Offering comprehensive technical and business consultation services;
2.Proposing the most suitable scheme and equipment for our clients;
3.Designing and fabricating targeted products according to the special requirements of clients;
4.Training periodically high qualified service technician.

After-sales service
1.Highly inspecting equipments in every working procedure, quality comes first;
2.Fast & Safe Delivery;
3.Assisting our clients for foundation construction of equipments;
4.Dispatching engineers to install and debug equipments;
5.Training the first-line operators on site;
6.Regularly visit clients to solve production problems;
7.Providing life-long maintenance service;
8.Providing technical exchanging.