High Speed Tissue Felt Press Felt for Making Tissue Paper Machine

• Customization: Available
• After-sales Service: Warranty
• Warranty: 1 Year
• Model NO.: Sun Hong
• Certification: ISO 9001:2008, CE
• Surface Treatment: Without Processing
• Manufacturing Process: Punched
• Material: Nylon, Polyester
• Felt Name: Paper Making Felt
• Felt Type: Single, Double, Ssb Triple Layer
• Felt Usage: Paper Making Industry
• Speed: Under 1500 M/Min
• Felt Application: Tissue, Packing, Cultural, Special Paper and etc
• Felt GSM Tolerance: ±4%
• Elongation Rate: ≤0.6%
• Transport Package: International Standard Transport Packages
• Specification: Make - to -Order
• Trademark: SunHong
• Origin: China
• HS Code: 5911320000
• Package Size: 130.00cm * 60.00cm * 40.00cm
• Package Gross Weight: 600.000kg

Product Description

SUN HONG PROVIDES HIGH PERFORMANCE PRESS FELT

Why Choose SUN HONG Press Felt?

According to paper machine and paper, we can change the structure of base mesh. It has the characters of anti-high pressure, good elasticity and filter ability, stable size, small elongation, great strength, effective to eliminate grooving, vacuum mark, blind-hole mark and other marks. Suitable to vacuum press, kinds of complex press and other press for producing high grad offset paper, and kinds of high grade paper and paper board etc.

Press Felt Choosing Paraments 

Parameter	Cultural Paper	Packaging Paper	BCTMP Paper
Paper Basis Weight	45-120 g/m²	100-300+ g/m²	Adjusted according to pulp ratio
Grammage Range	1350-1600 g/m²	1200-1800+ g/m²	1300-1700 g/m²
Air Permeability	Medium to low	High	Medium to high
Recommended Structure	BOM 1+1 / 1+2	Multi-layer BOM structure	Anti-clogging BOM structure
Key Consideration	Surface smoothness	Dewatering performance and durability	Anti-fouling and anti-clogging performance
Cleaning Focus	Filler accumulation	Stickies or wax deposits	Resin or fine fiber accumulation

Endless & Seam Press Felt

 

How to Select Suitable Press Felt?

The selection of paper-making press felt depends on the type of production, the requirements of quantitative and surface modification, the type of paper machine, the environmental conditions of blanket use and the existing cleaning and purification equipment for press felt.

When the requirements of paper surface modification are more strict, it is required that the longitudinal and horizontal yarn of press felt bottom net should be thinner, and the structure design requires smooth surface.

High speed and wide width paper machines require good strength and stability of blankets, and stronger blankets are required on grooves, blind holes and vacuum pressing rollers.

High pressure pressing load and hard surface of pressing roller will require higher mechanical properties of blankets. Press felts with high-pressure water washing are required to have good flocking fastness.

 

How to Install Paper Machine Press Felt?

01 Keep the felt clean to prevent oil from sticking to the press felt.
02 Before the press felt is flattened on each roll, it is not allowed to drop the top press roll, couch roll or support roll. Never pressurize the press roll until the paper machine is running normally.
03 When the press felt is running slowly until it is running well, moisten the felt evenly with water until the water is saturated, then adjust the tension to stretch the felts to the optimum length, width and dehydration condition.
04 There shall be sufficient gap between the spoke and the shaft sleeve or between the spoke and the spoke to make the felt easy to cover and avoid pulling the press felt in through the gap.
05 Before starting the machine, check whether there are foreign matters on the top and bottom of the press felt, as well as pressing and auxiliary devices.
06 The running direction of the press felt on the paper machine shall be marked by the arrow on the felt surface.

SUN HONG Production Process of Press Felt

Sun Hong has over 30 years experience of producing the press felt and fabric for the paper industry. We have the most advanced machine and professional process to make good proformance felt and fabric.

Before the buying, we will make the technical design date for customer to choose the most suitbale weight and structure of the felt.

After buying, when you received the felt and fabric, we can help you to install it. And when the process of use if you have any question, we can give you technical support.

We have full pre and after sale service. Welcome to contact us.

Sun Hong As The Outstanding Manufacturer With First Class Manufacturing Equipment

We have a whole set of the world's most advanced PMC production line. It lays a solid foundation for the production of high quality products. 
The width of 11m-26.5m complete specifications of the Swedish TEXO heavy loom, and German Jurgens loom Sweden TEXO warping machine Canada ISO winding machine. The width of 13.2M Austria FEHRER main needling machine. The world's most advanced double oil roller Setting machine.
Advanced manufacturing technology: Sun Hong has gone through a lot of production practice and repeated experimental research, to provide a reliable guarantee for high-quality products.

Packing & Shipping

Globle Exhibition & Globle Customer