Double Layer Polyester Forming Belt for Paper Machine

• Customization: Available
• After-sales Service: Warranty
• Warranty: 1 Year
• Model NO.: SUN HONG
• Surface Treatment: Without Processing
• Manufacturing Process: Stamping
• Material: Polyester
• Name: Forming Fabrics
• Supply Type: Make-to-Order
• Wire Diameter Warp(mm): 0.17-0.22
• Wire Diameter Weft(mm): 0.20-0.45
• Density (Root/Cm) Warp: 28-35
• Density (Root/Cm) Weft: 15.2-32
• Thickness: 0.41-0.87
• Transport Package: Wooden Case
• Specification: SH-FF109
• Trademark: SunHong
• Origin: China
• HS Code: 59119000
• Production Capacity: 20000 Pieces/Year

Product Description

How to Install Forming fabric

1. Before installing the forming wire, kindly check the equipment if it is in good condition, the surface of wires should be forbidden from unevenness, slanting, burr, sand, etc.

2. The running direction must be in accordance with the direction of the arrow on the wire, the wire should be placed in the correct position, and the rollers should be paralleled with each other to prevent the wires from being deflected.

3. There should be a swinging high-pressure water device that used to wash wire. Water pressure is not lower than 6-10 kg/cm² for the medium and low-speed paper machine; speed more than 350m/min, water pressure is not lower than 10-15 kg/cm²; When using multi-layer forming wire, water pressure is not lower than 15-30 kg/cm², meanwhile water should be clean and without sand.

4. When installing the forming wire, firstly let the wire be slightly tensioned, add water to lubricate the operation, adjust the tension to normal after sizing, keep the tension of the low-speed paper machine at 3-4 kg/cm², and high speed one at 4-6 kg/cm².

Advanced Equipment & Imported Raw Material

Sun Hong Forming Fabric produced withimported Equipment 14m German Weaving machine.Wide weaving width makes surethe rate of finished products yields . Austria Automatic seaming machine obtains Average splice point and strong constructions andNorway 14.5m heatsetting machine . Sun Hong Forming Fabric is characterized.
Our fabrics are avallable in a variety of woven patterns, mesh count, thread diameter, surface topography and air permeability uponyour request.

Parameter 

Weaving Series and type	Model	Filament Diameter (mm)		Density(root/cm)		Tensile Strength		Thickness (mm)	m³/m^2h	Force elongation
		Warp	Weft	Warp	Weft	Surface	Joint
4 heddle	SH27254	0.20	0.25	30	22	≥600	≥400	0.49	8000	0.6%
	SH27274	0.20	0.27	30	21.5	≥600	≥400	0.51	7800	0.6%
	SH31204	0.18	0.20	35	28	≥600	≥380	0.43	7500	0.68%
	SH31204-1	0.18	0.20	35	30	≥600	≥380	0.43	7000	0.68%
5 heddle	SH30205	0.17	0.20	32	28.5	≥500	≥350	0.41	7100	0.6%
	SH31215	0.20	0.21	35	32	≥600	≥400	0.48	7000	0.6%
8 heddle	SH25358	0.22	0.35	28	19.5	≥700	≥500	0.85	9000	0.65%
	SH25388	0.22	0.38	29.5	19	≥700	≥500	0.87	8500	0.65%
	SH27358	0.22	0.35	30	20	≥700	≥500	0.85	8500	0.65%
	SH25458	0.22	0.45	29	15.2	≥700	≥500	0.87	7500	0.65%

Related Porducts

1.Forming Fabric  

2.Paper Machine Felt        

3.Dryer Fabric    


Packing & Shipping

1.Bubble Film and waste thick fabric wrapping while protecting inside fabric.
2.Wrapped special fabric package outside(Air shipping ).
3.Composite wooden box(seashipping ).