| Customization: | Available |
|---|---|
| After-sales Service: | Warranty |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 0/Square Meter
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
2.5 layer forming fabrics are also known as support shute double layer fabrics or double layer extra designs. It extra support double layer forming fabrics are to further improve the characteristics of double-layer design.
It's a standard double layer forming fabric with an additional weft yarn on the sheet side of the fabric.
How to install Forming fabric
1. Before installing the forming wire, kindly check the equipment if it is in good condition, the surface of wires should be forbidden from unevenness, slanting, burr, sand, etc.
2. The running direction must be in accordance with the direction of the arrow on the wire, the wire should be placed in the correct position, and the rollers should be paralleled with each other to prevent the wires from being deflected.
3. There should be a swinging high-pressure water device that used to wash wire. Water pressure is not lower than 6-10 kg/cm² for the medium and low-speed paper machine; speed more than 350m/min, water pressure is not lower than 10-15 kg/cm²; When using multi-layer forming wire, water pressure is not lower than 15-30 kg/cm², meanwhile water should be clean and without sand.
4. When installing the forming wire, firstly let the wire be slightly tensioned, add water to lubricate the operation, adjust the tension to normal after sizing, keep the tension of the low-speed paper machine at 3-4 kg/cm², and high speed one at 4-6 kg/cm².
Application
2.5 layer forming fabric's weaving effect greatly increases the fiber support index due to the addition of a fine weave at the top. The ratio of the top and bottom wefts is 2:1. It suitable for paperboard,newsprint,writing paper,tissue paper,printing paper,kraft paper.
| Fabric Code | Warp Mesh | Weft Count | Warp Diameter | Weft Diameter | Air Permeability/m3/m2h CFM | FSI | DI | |
| SH2B6408 |
71.5-72.5 | 67.5-68.5 | 0.15 | 0.18 0.12/0.22 0.22 | 4350 | 275 | 155 | 25.7 |
| 71.5-72.5 | 65.5-66.5 | 0.15 | 0.18 0.12/0.22 0.22 | 4600 | 290 | 152 | 26.3 | |
| 71.5-72.5 | 56.5-57.5 | 0.15 | 0.18 0.12/0.22 0.22 | 5800 | 370 | 135 | 29.0 | |
| 71.5-72.5 | 47.5-48.5 | 0.15 | 0.18 0.12/0.22 0.22 | 7900 | 500 | 119 | 33.0 | |
| SH2B5616 |
62.5-63.5 | 60.5-61.5 | 0.17 | 0.20 0.13/0.30 0.30 | 4500 | 285 | 139 | 23.9 |
| 62.5-63.5 | 59.5-60.5 | 0.17 | 0.20 0.13/0.35 0.35 | 3950 | 250 | 137 | 20.6 | |
| 62.5-63.5 | 53.5-54.5 | 0.17 | 0.20 0.13/0.35 0.35 | 5050 | 320 | 126 | 23.7 | |
| 62.5-63.5 | 47.5-48.5 | 0.17 | 0.20 0.13/0.35 0.35 | 6000 | 380 | 115 | 25.1 | |
| SH2B4216 |
47.0-48.0 | 47.0-48.0 | 0.22 | 0.22 0.13/0.35 0.35 | 6000 | 380 | 107 | 25.1 |
| 47.0-48.0 | 40.0-41.0 | 0.22 | 0.25 0.17/0.40 0.40 | 7000 | 445 | 94 | 25.1 | |
| SH2B3616 | 40.5-41.5 | 38.5-39.5 | 0.26 | 0.30 0.20/0.50 0.50 | 5500 | 350 | 89 | 18.8 |
| 40.5-41.5 | 36.5-37.5 | 0.26 | 0.30 0.20/0.50 0.50 | 6350 | 400 | 85 | 20.4 | |
| 40.5-41.5 | 34.5-35.5 | 0.26 | 0.30 0.20/0.50 0.50 | 7000 | 445 | 82 | 21.4 | |
1.Bubble Film and waste thick fabric wrapping while protecting inside fabric.
2.Wrapped special fabric package outside(Air shipping).
3.Composite wooden box(seashipping).
SUN HONG INDUSTRIAL FABRIC with 400workers in-service, including the Special Product Development Team about 60 workers. Sun Hong Fabric focused on paper and pulp industry with cost-effective products and one by one design solution, help reducing energy consumption, increasing capacity while obtaining excellent ending paper property. We've been maintaining our commitment to serve you, your satisfaction is our pursuit.
1.Forming Fabric https://sunhong.en.made-in-china.com/product-group/dormXeQCbuhn/Forming-Fabric-1.html
2.Paper Machine Felt https://sunhong.en.made-in-china.com/product-group/dbYmvynchuVQ/Paper-Machine-Felt-1.html
3.Dryer Fabric https://sunhong.en.made-in-china.com/product-group/ZoUEKFQvCPWx/Dryer-Fabric-1.html
1. How long is the delivery time?
Normally less than 30 days
2. Can we get some samples? Any charges?
Yes, free existing small product, you need to pay shipping cost firstly. But We'll refund the freight charge when you place an order with us .
3. How can we get a quote?
Contact us with specification: such as paper kind, paper machine speed, paper weight use position etc.
You can also indicate if you have any special requirement. We'll recommend most suitable type for you and provide a formal quotation list after received your inquiry .
){kind=link}