Water Vacuum Pump/Sand Pump/Slurry Pump/ Centrifugal Pulp Pump for Paper Pulp Industry

Product Description

Sun Hong Pulp Pump


Pulp pump is a type of machinery widely used in the paper making industry. It is used for the circulation, lifting, and pressurization of media in pulp and alkali recovery industrial processes with a concentration of less than 6%.
It can also be used in the sugar industry to transport syrup with a concentration of less than 4% and a viscosity of less than 150mm²/s; The urban sewage discharge industry is used for the circulation, transportation, lifting, and pressurization of media in sewage treatment processes.


Horizontal Non-clogging Pulp Pump


The non-clogging pulp pump is a new type of energy-saving pulp pump. It has the characteristics of high speed, no or less leakage, good anti-clogging performance, stable operation, high reliability and compact structure. It is mainly reflected in the following aspects: the use of semi-open or fully open impeller, the clearance between the wear plate and the front side of the impeller is adjustable, the shaft seal mainly adopts mechanical seal and uses high-precision bearings (D-grade precision) and high-quality bearing materials, etc.
 

Structure

1. Pulp pump is a single-stage single-suction cantilever structure, mainly composed of pump body, impeller, pump cover, wear-resistant plate and suspension parts;

2. From the motor end, the motor rotates clockwise, and the pump is axially sucked and radially (middle) discharged;

3. The pump is a rear-opening structure, and the inlet and outlet pipes do not need to be disassembled during maintenance;

4. The pump shaft is supported by two high-precision rolling bearings and lubricated with thin oil (20# engine oil);

5. The shaft seal adopts two types of mechanical seal or packing;

6. The gap between the wear-resistant plate and the front side of the impeller can be adjusted by adjusting the screw to maintain the reliability of the continuous operation of the impeller;

7. The pump and the motor are directly connected by a pin coupling.

Pump Material Sheet
 

Name component Material of	Comment material(G)	Wear-resistant material(P)	Super-wear resistant material(N)		Stainless steel(F)
Pump body	HT200	QT500-7	Abrasion-resistant steel		304
Pump cover	HT200	QT500-7	Abrasion-resistant steel		304
Impeller	304	Two-phase stainless steel	Two-phase stainless steel		Two-phase stainless steel
Front,behind lining board	Abrasion-resistant steel	Abrasion-resistant steel	Abrasion-resistant steel		Two-phase stainless steel
Bearing body	HT250	HT250	HT250		HT250
Shaft	3Cr13	3Cr13	3Cr13		3Cr13
Axie sleeve	2Cr13	2Cr13	2Cr13		304
Each material used in
Medium situation				G		P	N	F
Water or white water				√
No inpurity,PH6-8,Pressure<0.6MPa				√		√
Granule inpurity,PH6-8,Pressure<0.6MPa						√	√
No inpurity,but corrosion;Tempurature requirementsPH6-8,for medium								√

TSJ Series Pulp Pump
 

The TSJ series pulp pump is a single class pump with two sucking inlets. The type of impeller is open or close. The placement oithe pump shell is level and symmetric. The pump is mainly used to feed waste water below 80'c, pulp below 2%-3%, cotton pulpor other liquid material including small size fiber or sludge. it has been one of the best ideal feeding pumps.

Technical Parameter
 

1.Totally open impeller,high efficiency,light in weight,small axial force,and the life the driving component.
2.It is easy to maintain and the chance for blocking is very little.And it can transmit media with a certain volume of gas.
3.The impeller was precision cast.Tested with Class G6.3 dynamic balance. it can run smoothly.

Pump type	Impeller diameter (mm)	Capacity (m³/h)	Head (m)	Speed (r/min)	NPSH(m)	Shaft power(KW)	Motor type/power (KW)
SH80-265	¢265	80	15	1500	2.4	4.6	Y132M-4/7.5
	¢255	75	13			4.1	Y132S-4/5.5
	¢245	70	12			3.5	Y132S-4/5.5
	¢235	65	10.5			2.9	Y112M-4/4
	¢225	60	9.5			2.3	Y100L2-4/3
	¢215	55	8.5			2.0	Y100L2-4/3
	¢205	50	8			1.7	Y90L-4/2.2
	¢195	45	7			1.5	Y90L-4/2.2
SH100-265	¢265	130	15	1500	2.4	7.3	Y160M-4/11
	¢255	120	13.5			6.5	Y160M-4/11
	¢245	115	12			5.4	Y132M-4/7.5
	¢235	110	10.5			4.5	Y132S-4/5.5
	¢225	100	9.5			3.7	Y132S-4/5.5
	¢215	95	8			3.2	Y112M-4/4
	¢205	90	7			2.7	Y112M-4/4
	¢195	80	6.5			2.2	Y100L2-4/3
	¢185	75	5.5			1.9	Y100L2-4/3
SH125-265	¢265	200	14	1500	4.5	10.8	Y160L-4/15
	¢255	180	13			9.2	Y160L-4/15
	¢245	170	12			7.5	Y160M-4/11
	¢235	165	10			6.3	Y160M-4/11
	¢225	150	9			5.2	Y132M-4/7.5
	¢215	140	7			4.1	Y132S-4/5.5
	¢205	125	6			3.2	Y112M-4/4
SH100-350	¢350	130	26	1500	3.2	14	Y180M-4/18.5
	¢340	125	25			12.5	Y160L-4/15
	¢330	120	24			11.3	Y160L-4/15
	¢320	115	22.5			10	Y160L-4/15
	¢310	110	20			8.9	Y160M-4/11
	¢300	100	19			7.8	Y160M-4/11
	¢290	90	18			6.8	Y160M-4/11
SH125-350	¢350	220	30	1500	4.5	24	Y200L-4/30
	¢340	200	28			22.3	Y200L-4/30
	¢330	185	27			19.8	Y200L-4/30
	¢320	170	26			17.4	Y180L-4/22
	¢310	150	25			14.5	Y180M-4/18.5
	¢300	135	23			12.6	Y180M-4/18.5
SH150-330	¢330	400	24	1500	4.6	33.3	Y225M-4/45
	¢320	380	22			29.4	Y225S-4/37
	¢310	360	20			25.6	Y225S-4/37
	¢300	340	18			21.8	Y200L-4/30
	¢290	325	16			18.7	Y200L-4/30
	¢280	310	14			16.3	Y180L-4/22
	¢270	300	12			13.8	Y180M-4/18.5
	¢260	290	10			12.1	Y160L-4/15
SH125-400	¢400	225	40	1500	3.5	33.2	Y225M-4/45
	¢390	210	38			31	Y225S-4/37
	¢380	200	36			26.8	Y225S-4/37
	¢370	180	35			23.4	Y200L-4/30
	¢360	175	33			21	Y200L-4/30
	¢350	170	31			19.2	Y200L-4/30
	¢340	155	30			17	Y180L-4/22
SH150-400	¢400	380	40	1500	3.6	56.7	Y280S-4/75
	¢390	370	37			50.3	Y280S-4/75
	¢380	360	35			45.4	Y250M-4/55
	¢370	350	32.5			40.1	Y250M-4/55
	¢360	335	30			35.4	Y225M-4/45
	¢350	325	27.5			31.9	Y225S-4/37
	¢340	300	26			28	Y225S-4/37
SH150-470	¢470	550	51	1500	5.0	101.5	Y315S-4/110
	¢450	500	48			84.5	Y315S-4/110
	¢430	450	44			67	Y280M-4/90
	¢410	425	38			57.3	Y280S-4/75
	¢390	400	33			48	Y280S-4/75
	¢370	370	29			38.2	Y225M-4/45
SH200-380	¢380	650	32	1500	3.3	69.4	Y280M4/90
	¢370	630	30			63	Y280S-4/75
	¢360	600	28			57.3	Y280S-4/75
	¢350	580	2605			51.9	Y280S-4/75
	¢340	540	25			45.5	Y250M-4/55
	¢330	500	24			40.9	Y250M-4/55
	¢320	450	23			36.8	Y225M-4/45
SH250-430	¢430	1100	41	1500	4.5	150.2	Y315L2-4/200
	¢410	1050	35			123.6	Y315L1-4/160
	¢390	1000	30			102	Y315M-4/132
	¢370	950	25			83.2	Y315S-4/110
	¢350	900	21			69	Y280M-4/90
	¢330	850	18			58.8	Y280S-4/75
	¢320	800	16			49.9	Y280S-4/75
SH200-470	¢470	700	53	1500	4.5	131	Y315L1-4/160
	¢450	650	48			107.9	Y315M-4/132
	¢430	600	44			91.7	Y315S-4/110
	¢410	550	39			76.3	Y280M-4/90
	¢390	500	35			62	Y280S-4/75
SH350-470	¢470	1500	45	1500	7.0	226.9	Y315M2-4/250
		1800	40			233.6	Y355L1-4/280
	¢450	1500	39			196.6	Y355M1-4/220
	¢430	1420	35			168.3	Y315L2-4/200
	¢410	1400	30			138.4	Y315L1-4/160
	¢390	1300	27			123.9	Y315L1-4/160
	¢370	1180	25			108.1	Y315M-4/132
SH400-500	¢550	2500	30	1000	6.0	258.5	Y400-6/280
	¢530	2400	28			238.5
	¢510	2300	25			210	Y355L2-6/250
	¢490	2220	23			180	Y355M3-6/200
	¢470	2130	22			165	Y355M3-6/200
	¢450	2040	20			144	Y355M2-6/185

Packing & Shipping

Packaging

Products will be packaged according to their shapes, weight, transport distance and transport modes. Large machines will be packaged in sections. Every part of export machinery will be in standard export wooden package, waterproof film, straw rope, carton box ,etc, which will ensure the intactness of the products.

Delivery

1. Sea transportation is from qingdao seaport or other ports.
2. The delivery time is decided by your needed machines or machine parts. But it also follows your needs.

 

 

 

SUN HONG GROUP

Sun Hong Group is a company specializing in serving the pulp and paper industry by manufacturing quality equipment and provide technical support to help customers solve various problems in production. Our aim is to help our customer improve production efficiency and reduce energy consumption.
Own factory equipped with high-precision CNC machine tools and machining centers, advanced equipmentsand instruments, which can fully guarantee the stability and reliability of the products. There we can offer youthe best quality at the most competitive prices.
In addition to providing equipment, it is more important to provide technical services. We has a professionaltechnician team that is devoted to pulp and paper industry. We are able to make the best proposal after com.pletely analyzing and figuring our problems of the paper production line though paper-making progress,equipment,electric automatization and so forth.
Welcome to contact us. Sun Hong Group look forward to cooperating with you.