Kraft Paper Machine Surface Size Press Membrane Transfer Sizing Machine

• Customization: Available
• Type: Sizing Machine
• Sheet Former Type: Fourdrinier Wire
• Model NO.: CV23
• Paper Thickness: Thick Paper
• Automation: Automatic
• Certification: CE, ISO
• Customized: Customized
• Condition: New
• Trim Width: 5150-5600mm
• Wire Width: 5660-6050 mm
• Design Speed: 600-900m/Min
• Capacity: 288-458t/D
• Transport Package: Standard Seaworthy Package
• Specification: Make to order
• Trademark: SUN HONG
• Origin: China
• HS Code: 8439990000

Product Description

Summary

In the traditional size press,with the increasing of the working speed, it is easily feeding uneven, paper sheet breaking or wrinkling. The membrane transfer sizing press could overcome these drawback. The membrane transfer sizing press could be used for surface sizing,paint sizing and coating. Sizing/coating amount is 0.5-12g/both sides. It is fit for many paper grades. It could size the same coating material or different coating material on both sides at the same time.And it also could size one side.It is flexible. This feature is very practical in the production of specialty paper.The membrane transfer sizing press reduce the break,and it request not too high for the base paper strength,we could increase the mechanical pulp ratio to reduce the cost.

Principle

Membrane transfer sizing press is rod type sizing equipment. It is different from the traditional double-roll double roller weir pool size press. The sizing liquid or the coating material is to the sizing roll through pre-measurement of the measuring rod.lt could form uniform film. When the paper web pass through two relative rotation sizing roll press area,the film was sent to the film.Because of the pre-measurement of the film, the film is thin and uniform.ln the press area, the paper stand less water pressure. It reduces the break and improve the paper machine maneuverability.

                          Component
                             (1)Rack
                             (2)Guide roller mechanism
                             (21)Upper guide roller group
                             (22)Lower guide roller group
                             (3)Reverse sizing mechanism
                             (31)Reverse sizing shaft
                             (32)Coater
                             (4)Front sizing mechanism
                             (41)Front sizing shaft
                             (42)Front sizing machine
                             (5)Feeding system
                             (51)Hose application

 

Features

1.Good running performance,
2.Big adjustable range of coating amount,
3.The working speed influence the coating amount less,
4.The coating material solid content influence the coating amount less,
5.The absorbing capacity quality of paper sheet influence the coating amount less,
6.The moisture of the base paper influence the coating amount less,Less paper web break,
7.Decrease the energy consumption of the back drying part,
8.The coating machine could work normally even the paper web is high moisture,
9.The coating amount on the both sides could be different.

Product Parameters

 

Sizing machine for board paper machine		Inclined sizing machine
Sizing weight	15g/m^2	Sizing weight	2g/m^2
Basis weight	95-210g/m^2	Basis weight	126g/m^2
Trim width	5150 mm	Trim width	5600 mm
Wire width	5660 mm	Wire width	6050 mm
Production capacity	288t/d	Production capacity	458t/d
Design speed	600m/min	Design speed	900m/min

Our Service

Pre-Sales Service
1.Offering comprehensive technical and business consultation services;
2.Proposing the most suitable scheme and equipment for our clients;
3.Designing and fabricating targeted products according to the special requirements of clients;
4.Training periodically high qualified service technician.
After-Sales Service
1.Highly inspecting equipments in every working procedure, quality comes first;
2.Fast & Safe Delivery;
3.Assisting our clients for foundation construction of equipments;
4.Dispatching engineers to install and debug equipments;
5.Training the first-line operators on site;
6.Regularly visit clients to solve production problems;
7.Providing life-long maintenance service;
8.Providing technical exchanging.