Triple Layer Forming Fabric for High Speed Paper Machine

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: SunHong
• Certification: ISO 9001:2000, ISO 9001:2008, CE
• Surface Treatment: Heat Setting
• Manufacturing Process: Woven
• Material: Polyester
• Name: Forming Fabrics
• Supply Type: Make-to-Order
• Wire Diameter Warp(mm): 0.17-0.22
• Wire Diameter Weft(mm): 0.20-0.45
• Density (Root/Cm) Warp: 28-35
• Density (Root/Cm) Weft: 15.2-32
• Thickness: 0.41-0.87
• Transport Package: Wooden Case
• Specification: SH-FF109
• Trademark: SunHong
• Origin: China
• HS Code: 84399900

Product Description

Classifications

 

• Single-layer, one set of CD yarns woven together with one set of MD yarns.
  Double layer - two sets of CD yarns stacked on top of each other, woven together with one set of MD yarns.

• Double-layers, two sets of CD yarns stacked on top of each other woven together with one set of MD yarns, to enhance the abrasion resistance property and fiber support.

• Two and a half layers -  additional CD yarns typically smaller in diameter added to the top layer of a double layer fabric to provide better fiber support, also expands the space and enhances the dehydration ability and service life.

• Triple-layer - two single-layer forming fabrics bound together by a set of smaller CD strands, to get much better-supporting points. The surface layer is flat heald which has the better property for sheet forming, the bottom layer in four, five or six healds to get good wear resistance.

Application

Good and properly designed woven structure, easy to clean and maintain.

Made out by the top quality of raw material, which has good strength and long life span.

Available in a variety of woven patterns,mesh count,thread diameter,surface topography and air permeability upon your request.

Our customer's Installation

How to Extend life of fabrics

1. Put the forming fabric into the workshop one week in advance to make it get used to the temperature change.
When put on the fabric, stay away from sharp edges and open fires.

2. The application temperature shall under 150ºC, the tension of single-layer polyester forming wire should be controlled at 40-50N/cm, double and triple layer at 60-70N/cm.

3. Because of the special nature of the raw material, please pay attention to the scientific use of cleaning agents, chemical cleaning must choose neutral or 5% cold alkali solution with soft brush, and then immediately rinse with water.
 

 

Sun Hong Technical

 

Advanced Equipment

               Sweden Warping Machine                                   Sweden Warping Machine                              Automatic Jointing Machine

                  TEXO Weaving Machine                                13.5m Heat Setting Machine                                  13.5m Heat Setting Machine

Imported Monofilment Raw Material

Packing & Shipping

Globe Exhibition