| Customization: | Available |
|---|---|
| Type: | Rewinder |
| Sheet Former Type: | Fourdrinier Wire |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The rewinding machine is a special equipment for paper, mica tape and film. Its purpose is to rewind the paper roll produced by the paper machine (called the original paper roll), and the paper is re-rolled to make the finished paper. The AC drive of the factory rewinding machine has replaced the DC drive in the paper machine industry and has become a development trend. The paper roll taken by the reel is relatively soft, the inside may be damaged or broken, the edges on both sides are not neat, the paper, the width of the sheet, etc. can not be directly used in paper processing or printing machines, most paper types (such as Newsprint, letterpress printing paper, wrapping paper, etc.) must be cut through the rewinder, cut, joints, re-rolled on the paper core to form a certain specification, the finished paper roll with a certain tightness requirement can be shipped.
| Model | 1880 | 3000 | 3500 |
| Max width of raw paper | 2100mm | 3000mm | 3500mm |
| Diameter of raw paper | 1200mm | 1500mm | 1500mm |
| Diameter of inner core | 76.2mm(other size can be ordered according to the requirement) | ||
| Finished product | Toilet paper with or without inner core | ||
| Perforating | With 4-6 spiral perforation knives | ||
| Embossing | Embossing (without,single,double,steel to flat steel | ||
| Bottom embossing roller | Wool,rubber,steel roller | ||
| Max | 200-260m/min | ||
| Motor | 7.5-35kw | ||
| Edge embossing | Individual pneumatic(air bag,cylinder),steel to steel | ||
| Unwinding stand | 1-4 plies,normal chain drive or separate motor drive | ||
A.For paper width up to 350Omm to make bathroom tissue, kitchen towels and industrial rolls up to 300mm diameter. Equipped with variable perforation length system to satisfy any length need. The speed of thisrewinderisupto260m/min, 6cyles per minute, including:
(1) Two steel to rubber or steel to paper embosser units
(2) Two or three back stands, with a double or three belt driving system,for jumbo rolls up to 1500mm diameter, and with a pneumatic loading of jumbo roll system.
B.This line will automatically change logs and unload the finished products, and automatically
trim and seal the tails of the logs,leaving a lipabout20mmtomakeiteasyfor consumers to start using the rolls without tearing the paper at the seal.
C.All the driven system to be by means of timing belts, nylon belts and gears, for years of free maintenance. Elect-rical eyes will be mounted on
the different parts of the line to monitor the machine and stop it in case it runs out of paper,cores or any other unforeseen problems.The lubrication systems will be provided on the major parts of the line.
D.The motor power is 7 .5KW.Variable frequency control depending on the final specifications and requirements.
E.This line is to be controlled by a PLC of your choice.
Pre-Sales Service
1.Offering comprehensive technical and business consultation services;
2.Proposing the most suitable scheme and equipment for our clients;
3.Designing and fabricating targeted products according to the special requirements of clients;
4.Training periodically high qualified service technician.
After-Sales Service
1.Highly inspecting equipments in every working procedure, quality comes first;
2.Fast & Safe Delivery;
3.Assisting our clients for foundation construction of equipments;
4.Dispatching engineers to install and debug equipments;
5.Training the first-line operators on site;
6.Regularly visit clients to solve production problems;
7.Providing life-long maintenance service;
8.Providing technical exchanging.
){kind=link}