The dryer cylinder for paper machine is a key part of paper drying, which is class I pressure vessel. The number of dryer cylinder accounts for about 2 / 3 of the total pressure vessels in the paper industry. Generally, the materials used for drying cylinder are HT200 and HT250. In order to increase the smoothness of paper surface, the outer surface of the dryer should be polished and the inner surface should be polished to keep the thickness of the whole dryer wall consistent, so as to ensure the safety, balance and uniform heat transfer of the dryer. The function of the dryer is to dry the moisture in the paper and finish the paper surface.
The saturated steam from the steam joint condenses in the dryer, and the heat released makes the temperature of the dryer rise, thus heating the paper coated on the surface of the roller shell. Heat is transferred to the paper in contact with the surface of the dryer.
The steam releases heat and condenses to produce a large amount of condensate water, which is attached to the inner surface of the dryer by centrifugal force due to the rotation of the dryer, and forms a water ring under the condition of high angular velocity, which hinders the heat transfer to the surface of the dryer. Therefore, the siphon is needed to discharge the condensate water in time. When the speed is low, there will be no water ring, but there will be condensation water splashing and accumulating in the dryer.
1.The shell is thinner,ensure the more heat to transfer(Evaporate rate).
2.Better elasticity,stronger compressive resistance,which have enough security coefficient for heat shock,machinery fault and potential explosion etc hazards.
3.The surface metal spraying adopts advanced foreign technology and equipment,increase service life.
4.The metal coating of surface can reinforce the chemical coating and wrinkling.
5.No bolts heads to block,can improve the papers stable performance.
6.During operating,the shell thickness is reduced and the metal coating is fall off,which not affects the using performance.
7.Since the date of installing can be put into operating,don't need to run-in with the host,its performance will not reduce as the service life is growing.
The drying cylinder is a hollow cylinder made of cast iron with covers at both ends. It is composed of cylinder block and cylinder heads at both ends. Its outer diameter is mostly 1000-3000mm. During operation, steam is used to dry and iron the transported paper.
The main parts of cylinder dryer include: shell,dryer bars,syphon, manhole cover, shell head, spherical roller bearing, steam joint ,etc.
Diameter
(mm) |
Design Pressure
(MPa) |
Material |
Hardness
HB |
Web Width
(mm) |
Shell Thickness
(mm) |
Roughness |
Working Speed
(m/min) |
| 1500 |
0.3-0.8 |
HT250-300 |
190-240 |
350-1000 |
20-30 |
0.2-0.4 |
200-1200 |
| 1800 |
0.3-0.8 |
HT250-300 |
190-240 |
350-1000 |
23-35 |
0.2-0.4 |
200-1200 |
| 2000 |
0.3-0.8 |
HT250-300 |
190-240 |
1350-5000 |
24-38 |
0.2-0.4 |
200-1200 |
| 2500 |
0.3-0.8 |
HT250-300 |
190-240 |
1350-5000 |
24-46 |
0.2-0.4 |
200-500 |
| 3000 |
0.3-0.8 |
HT250-300 |
190-240 |
1350-5000 |
28-54 |
0.2-0.4 |
200-600 |
| 3660 |
0.3-0.8 |
HT250-300 |
190-240 |
1350-5000 |
33-65 |
0.2-0.4 |
200-1200 |
| 3680 |
0.3-0.8 |
HT250-300 |
190-240 |
1350-5000 |
33-65 |
0.2-0.4 |
200-1200 |
Established in 2010, Sun Hong Group is a comprehensive company integrating planning, design, technical support, production, testing and training. We have a professional technical team to provide you with professional design and technical support as well as the best source of goods. After more than ten years of efforts, our products have been exported to 96 countries, and have more than 300 paper plants customers.
Audited Supplier 
){kind=link}
){kind=link}