Ceramic Dewatering Element
Ceramic dewatering elements are widely used in the forming section of paper machine, such as forming board, vacuum foil, vacuum suction box and cover, wet suction box and cover, etc. Its use greatly improves the speed of paper machine, the quality of paper and reduces the cost.
Forming Board
The special design structure of the forming board is that it can be installed near the breast roll or the breast roll scraper. It can move back and forth and adjust to the pulp spray point to achieve good paper forming and dehydration effect. The forming board is composed of box and panel. The box is made of stainless steel. The panel is made of alumina ceramic or polyethylene or PTFE. Customers can choose different panels according to different paper machines, different paper types and different machine speeds.
High Vacuum suction box
The structural design of the vacuum suction box is reasonable and is a sealed structure. It is pumped by vacuum pump to make the paper excessive from low-pressure dehydration to high-pressure rapid dehydration, so as to accelerate the paper drying and enhance the dehydration effect and paper forming. Both ends of the panel are equipped with adjusting blocks to adjust the suction width of the paper sheet. The adjusting block is also equipped with a lubrication device, which can reduce the friction coefficient and increase the service life of the net through clean water lubrication.
The vacuum suction box is composed of box and panel. The box is made of stainless steel. The panel is made of alumina ceramic or polyethylene or PTFE. Customers can choose different panels according to different paper machines, different paper types and different machine speeds.
Felt Suction Box
The structural design of felt suction box is a sealed structure. It is pumped by vacuum pump, so as to accelerate the drying of paper, enhance the dehydration effect and the forming of paper. Both ends of the panel are equipped with adjusting blocks to adjust the suction width of the paper sheet.
The vacuum suction box is composed of box and panel. The box is made of stainless steel. The panel is made of alumina ceramic or polyethylene or PTFE. Customers can choose different panels according to different paper machines, different paper types and different machine speeds.
Suction Box Cover
The panel/suction cover is processed as a whole, using special machine tools and special processing technology, so that the overall processing accuracy is high,the surface is smooth, and the finish is high, smooth and delicate.
Perforation Patterns
Slot and hole patterns are fabricated in any design at the most competitive prices. Five standard designs are available to choose from.
Working Principle
The suction box dewatering is based on the suction effect of the vacuum pump, which generates a high pressure difference between the top and bottom of the paper to force the dewatering of the wet paper. It help to transfer the paper to the press section with a higher dryness.
In the jet-fixing process, the suction box is installed under each spunlace device. It adopts a vacuum suction type. The suction box sprays the water from the spunlace head on the supporting net curtain into the water vapor separator. After that, the air is discharged by the blower, and the water is sent to the filtering device by the pipeline through the pipeline. The moisture content of the web after water absorption can be reduced to 25% to 35%
Audited Supplier 
){kind=link}