Function
The forming fabric is an important equipment on paper machine. The primary functions of forming fabrics are to permit water removed from the sheet to flow through the fabric; support, retain, and form the sheet; and to convey the sheet from the head box to the press section.
Type
Single Layer Forming Fabric
mainly used for producing cultural paper (single glue, double glue and color glue), printing paper, glazed paper, packing paper, common newsprint.
1.5 Layer Forming Fabric
suitable for producing medium and high grades cultural paper and special paper.
Double Layer Forming Fabric
Suitable for producing paperboard, writing paper, tissue paper and kraft paper.
2.5 Layer Forming Fabric
suitable for producing offset printing paper, copper plate paper and cigarette paper series, also it could be used for producing toilet paper, tissue paper and surface pulp, core pulp and bottom pulp of the board paper.
Triple Layer Forming Fabric
Mainly used for producing copy tissue, tissue napkin, top or liner side for kraft and card board.
Quality Inspection
Our engineer is inspecting the quality and size of finished forming fabric.
Advantage
1. Long service life, wear resistance and low net consumption.
2. High fatigue strength, acid and alkali resistance.
3. Light net mark and good molding quality.
4. Light weight, convenient transportation and easy operation.
Detailed Photos
How to Install Forming fabric
1. Before installing the forming wire, kindly check the equipment if it is in good condition, the surface of wires should be forbidden from unevenness, slanting, burr, sand, etc.
2. The running direction must be in accordance with the direction of the arrow on the wire, the wire should be placed in the correct position, and the rollers should be paralleled with each other to prevent the wires from being deflected.
3. There should be a swinging high-pressure water device that used to wash wire. Water pressure is not lower than 6-10 kg/cm² for the medium and low-speed paper machine; speed more than 350m/min, water pressure is not lower than 10-15 kg/cm²; When using multi-layer forming wire, water pressure is not lower than 15-30 kg/cm², meanwhile water should be clean and without sand.
4. When installing the forming wire, firstly let the wire be slightly tensioned, add water to lubricate the operation, adjust the tension to normal after sizing, keep the tension of the low-speed paper machine at 3-4 kg/cm², and high speed one at 4-6 kg/cm².
Company Profile
Established in 2010, Sun Hong Group is a comprehensive company integrating planning, design, technical support, production, testing and training. We have a professional technical team to provide you with professional design and technical support as well as the best source of goods. After more than ten years of efforts, our products have been exported to 96 countries, and have more than 300 paper plants customers.
Sun Hong Group have a wide range of business, we can design and produce various customized products according to the different requirements of different customers. Mainly involving Paper Machine Clothing, Industrial Fabric, Paper and pulp machine spare parts, test equipment, etc. In addition, we also provide customers with update and transformation services to enhance customer output.
Packing and Delivery
1.Bubble Film and waste thick fabric wrapping while protecting inside fabric.
2.Wrapped special fabric package outside(Air shipping ).
3.Composite wooden box(Sea shipping ).
Our Customer
Audited Supplier 
){kind=link}
){kind=link}